Nevion Multicon User Manual download pdf (Page 26)

Operation 26

ID: man-multicon Multicon Manual Rev. L

Figure 6.5 Nevion Conﬁgurator system overview

If your Multicon controller is not assigned to a system:

1. Open Nevion Conﬁgurator. When the Open / create system dialog appears, click the

Create system tab.

Figure 6.6 Nevion Conﬁgurator create system

1. Enter a System name and optionally a System description. Click OK.

2. A new empty system is created. Your Multicon controller should be listed under Uncon-

ﬁgured devices on the left hand side.

3. Select the Multicon controller you want to include in the system and drag it into the sys-

tem overview.

1. Click upload from the menu bar. The Multicon controller is added now added as the

only device in the system.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 82 83

Multicon 1
User Manual 1
Contents 2
D.1 Materials Declaration 82 5
D.2 Recycling information 82 5
1 Nevion Support 6
2 History 7
3 Product Overview 8
Product Overview 9 9
3.1.1 Product Oﬀering 9
3.1.2 Licensed Features 9
Product Overview 10 10
4 System Architecture 11
4.2 VikinX Sublime 12
4.3 VikinX Modular 13
System Architecture 14 14
System Architecture 15 15
5 Speciﬁcations 16
5.3 Performance 18
5.4 Front View 19
5.5 Rear View 20
5.6 Hardware Speciﬁcations 20
Speciﬁcations 21 21
6 Operation 22
Operation 23 23
6.2 System Concept 24
Operation 26 26
6.3 License Keys 27
6.4 Firewall Conﬁguration 28
7 Web Interface 29
7.2 Alarms Page 30
7.3 Log Page 31
7.4 Conﬁg Page 32
Web Interface 33 33
Web Interface 34 34
7.4.2 Date and Time 34
Web Interface 35 35
7.4.3 Flashlink 35
7.4.4 Debug Terminal 35
7.4.5 SNMP Setup 35
Web Interface 36 36
Enable legacy local traps 36
7.5 Manuals 37
8 Flashlink Web Interface 38
Flashlink Web Interface 39 39
8.2.1 Information Page 39
Flashlink Web Interface 40 40
8.2.2 Conﬁguration Page 40
8.2.2.1 Card Label 40
Flashlink Web Interface 41 41
8.2.2.2 Advanced Conﬁguration 41
8.2.2.3 Matrix Conﬁguration 41
Flashlink Web Interface 42 42
8.2.2.4 Alarm Conﬁguration 42
8.3 Multicon Module View 43
8.4 Flashlink Maintenance 44
Flashlink Web Interface 45 45
8.4.2 Rack Labels 45
8.5 Debug Terminal 46
Flashlink Web Interface 47 47
Flashlink Web Interface 49 49
Flashlink Web Interface 50 50
8.6.3 FPGA Upgrade Process 50
9 Web Control Interface 51
Web Control Interface 52 52
9.2 Matrix View 53
9.3 Salvo View 54
Web Control Interface 55 55
10 System Overview 56
11 Software Upgrade 57
Software Upgrade 59 59
Software Upgrade 60 60
12 Hardware Information 61
12.2 Status LEDs 62
12.3 How to Access the Module 63
12.5 Storage 64
12.6 Battery (Mk2 only) 65
12.7 Reset Button (Mk2 only) 66
12.8 Dip switches (Mk4 only) 66
12.9 Flashlink Card Hot Swap 67
12.10 Back Plane Connectors 68
12.11 GPIO 70
12.13 Serial Connectivity 71
12.14 Ethernet Connectivity 72
A.2 NCB Sublime/Compact 74
A.3 SNMP 74
A.4 Snell Pro-bel SW-P-02 74
A.5 Leitch Pass-Through 75
Protocol Speciﬁcations 76 76
A.6 Triton 77
Protocol Speciﬁcations 78 78
Protocol Speciﬁcations 79 79
Appendix C Product Warranty 81
D.1 Materials Declaration 82
D.2 Recycling information 82

Comments to this Manuals

No comments

Nevion Multicon User Manual Page 26

Comments to this Manuals